If you do not find the product that you require or the prices are not available ($0) please send us an email/ call us so we can assist. *Sold out products can be made available upon request.
Cart 0
TrippLite SMARTINT2200VS

TrippLite SMARTINT2200VS

$1,494.00

SmartPro 230V 2.2kVA 1.6kW Line-Interactive UPS, Tower, SNMPWEBCARD Option, USB, DB9 Serial

  • 2.2kVA / 2200VA line interactive tower UPS system
  • 230V nominal output during brownouts to 151 and overvoltages to 282V
  • Front panel status LEDs with load and battery capacity level display
  • USB, RS232, EPO and optional SNMP/Web interface; 3 switched load banks
  • C20 inlet; 8 C13 & 1 C19 outlets; 2 C13 to C14 cables included

Features

  • SMARTINT2200VS line interactive UPS offers protection from blackouts, brownouts, overvoltages and surges
  • 2200VA / 1600 watt capacity
  • Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes
  • Intelligent battery management system extends battery life
  • Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V
  • Includes 9 UPS supported outlets with 3 individually controllable load banks that can be powered off and back on again via software interface
  • IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
  • PowerAlert UPS monitoring and unattended shutdown software included
  • Offers simultaneous monitoring by up to 4 directly-connected devices through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software.
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Emergency Power Off(EPO) interface with cable
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for immediate reboot of connected devices
  • Supports Tripp Lite's WatchDog software application(requires optional WATCHDOGSW)
  • Built-in accessory slot supports SNMP with optionalSNMPWEBCARD adapter
  • Emergency Power Off(EPO) interface with cable
  • Multi-function audible alarms and set of 5 front panel LEDs
  • Network-grade AC surge suppression
  • Attractive gray color scheme
  • Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
  • Specifications

    OUTPUT
    Output Volt Amp Capacity (VA) 2200
    Output kVA Capacity (kVA) 2.2
    Output Watt Capacity (Watts) 1600
    Output kW Capacity (kW) 1.6
    Power Factor 0.7
    Nominal Output Voltage(s) Supported 220V; 230V; 240V
    Nominal Voltage Details 230v inverter nominal output voltage
    Frequency Compatibility 50 / 60 Hz
    Output Voltage Regulation (Line Mode) -19% +8%
    Output Voltage Regulation (Battery Mode) +/- 5%
    Output Receptacles (8) C13; (1) C19
    Included Output Power Cables Includes 3 C13 to C14 output power cables
    Load Management Receptacles Three switchable two-outlet C13 load banks
    Output Circuit Breakers 10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered
    Hot-Swap PDU options PDUBHV20 (2U / 6 C13, 2 C19 outlets)
    Output AC Waveform (AC Mode) Sine wave
    Output AC Waveform (Battery Mode) PWM sine wave
    INPUT
    Rated input current (Maximum Load) 11.3A
    Nominal Input Voltage(s) Supported 230V AC
    UPS Input Connection Type C20 inlet
    UPS Input Connection Description IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
    Input Phase Single-Phase
    BATTERY
    Full Load Runtime (min.) 7 min. (1600w)
    Half Load Runtime (min.) 19 min. (800w)
    DC System Voltage (VDC) 48
    Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical, full load discharge)
    Internal UPS Replacement Battery Cartridge RBC54
    Battery Access Battery access door
    Battery Replacement Description Hot-swappable, user replaceable batteries
    Expandable Runtime No
    VOLTAGE REGULATION
    Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V
    Overvoltage Correction Input voltages between 245 and 282 are reduced by 12%
    Undervoltage Correction Input voltages between 177 and 199 are boosted by 14%
    Severe Undervoltage Correction Input voltages between 151 and 176 are boosted by 30%
    USER INTERFACE, ALERTS & CONTROLS
    Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
    Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
    Audible Alarm Audible alarm indicates power-failure, overload and low-battery conditions
    LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
    SURGE / NOISE SUPPRESSION
    UPS AC Suppression Joule Rating 480
    UPS AC Suppression Response Time Instantaneous
    EMI / RFI AC Noise Suppression Yes
    PHYSICAL
    Primary Form Factor Tower
    UPS Power Module Dimensions (hwd, cm) 36.2 x 23.5 x 30.5
    UPS Power Module Weight (kg) 24.5
    UPS Shipping Dimensions (hwd / cm) 40.6 x 37.5 x 50.2
    Shipping Weight (kg) 27.5
    Cooling Method Fan
    UPS Housing Material Polycarbonate
    ENVIRONMENTAL
    Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
    Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
    Relative Humidity 0 to 95%, non-condensing
    AC Mode BTU / Hr. (Full Load) 347.2
    Battery Mode BTU / Hr. (Full Load) 812.9
    AC Mode Efficiency Rating (100% Load) 94%
    Audible Noise Audible Noise < 47dBA At Front Side 1 Meter
    COMMUNICATIONS
    Communications Interface USB; DB9 Serial; Contact closure
    Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total)
    PowerAlert Software Included
    Communications Cable 2 USB and 2 DB9 cables included
    WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
    LINE / BATTERY TRANSFER
    Transfer Time 2-4 milliseconds
    Low Voltage Transfer to Battery Power (Setpoint) 151
    High Voltage Transfer to Battery Power (Setpoint) 282
    SPECIAL FEATURES
    Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
    High Availability UPS Features Hot swappable batteries
    Green Energy-Saving Features Individually controllable load banks
    CERTIFICATIONS
    UPS Certifications CE; Meets FCC Part 15 Category A (EMI)
    UPS Certification Details CE 62040
    WARRANTY
    Product Warranty Period (International) 2-year limited warranty
    Product Warranty Period (Mexico) 2-year limited warranty
    Product Warranty Period (Puerto Rico) 2-year limited warranty

            More from this collection