PLEASE NOTE: All prices are exclusive of GST │ Please call / email our sales team to get the updated product price and to check the stock availability before placing an order. If you do not find the product that you require or the prices are not available ($0) please send us an email/ call us so we can assist. *Sold out products can be made available upon request.
Cart 0
TrippLite SMX1050SLT

TrippLite

TrippLite SMX1050SLT

$935.00

SmartPro 230V 1.05kVA 650W Line-Interactive Sine Wave UPS, Tower, SNMPWEBCARD Option, USB, DB9 Serial

  • 1.05kVA / 1050VA line interactive tower UPS; Sine wave output
  • 220/230/240V nominal output during brownouts and overvoltages
  • USB, RS232 and optional SNMP/WEB card interface
  • Front panel status LEDs with load level and battery capacity display
  • C14 inlet; 8 C13 outlets; C13 to C14 cable included

Features

  • SMX1050SLT line-interactive UPS offers battery-derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1050VA/650W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 20 min. at half load(525VA/325W) and 7 min. at full load(1050VA/650W)
  • Intelligent battery management system extends battery life
  • Automatic voltage regulation(AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V(220V), 182-278V(230V) or 190-290V(240V)
  • 8 x C13 output receptacles
  • IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running of user-defined script commands
  • Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces(*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X.
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again(requires optionalWATCHDOGSW)
  • 9 LEDs provide continuous status information of UPS operating parameters and site power quality
  • Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
  • Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
  • Single line tel/DSL and network Ethernet line surge suppression
  • CE/IEC 62040, GOST, SASO

Specifications

OUTPUT
Output Volt Amp Capacity (VA) 1050
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 650
Power Factor 0.6
Nominal Output Voltage(s) Supported 220V; 230V; 240V
Nominal Voltage Details 230V default (voltage selection via back panel switches)
Frequency Compatibility 50 / 60 Hz
Output Voltage Regulation (Line Mode) -9%, +5%
Output Voltage Regulation (Battery Mode) +/- 5%
Output Receptacles (8) C13
Included Output Power Cables Includes 2 C13 to C14 output power cables
Hot-Swap PDU options PDUBHV10 (2U / 8 C13 outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 2.8A (230V), 3.0A (220V), 2.7A (240V)
Nominal Input Voltage(s) Supported 220V AC; 230V AC; 240V AC
UPS Input Connection Type C14 inlet
UPS Input Connection Description IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 7 min. (650w)
Half Load Runtime (min.) 20 min. (325w)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included Batteries) Less than 8 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge RBC24-SLT
Battery Access Battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 182 to 278 (230v), 190 to 290 (240v), 174 to 266 (220v)
Overvoltage Correction Voltage reduction of 12% applies when input is 244 to 278 (230v), 254 to 290 (240v), 232 to 266 (220v)
Undervoltage Correction Voltage boost of 14% applies when input is 182 to 206 (230v), 190 to 216 (240v), 174 to 198 (220)
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates power failure and overload conditions
LED Indicators 9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 350
UPS AC Suppression Response Time Instantaneous
UPS Dataline Suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Primary Form Factor Tower
UPS Power Module Dimensions (hwd, cm) 26 x 17.1 x 33.7
UPS Power Module Weight (kg) 16.3
UPS Shipping Dimensions (hwd / cm) 35.6 x 24.8 x 47
Shipping Weight (kg) 17.5
Cooling Method Fan
UPS Housing Material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 141.1
Battery Mode BTU / Hr. (Full Load) 359.8
AC Mode Efficiency Rating (100% Load) 94%
Audible Noise Audible Noise < 50 dBA at Front Side 1 Meter
COMMUNICATIONS
Communications Interface USB; DB9 Serial; Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time 4-8 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 174V (220V), 182V (230V) or 190V (240V)
High Voltage Transfer to Battery Power (Setpoint) 266V (220V), 278V (230V) or 290V (240V)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
CERTIFICATIONS
UPS Certifications CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Meets FCC Part 15 Category B (EMI)
UPS Certification Details CE / IEC 62040
WARRANTY
Product Warranty Period (International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto Rico) 2-year limited warranty

                    More from this collection