If you do not find the product that you require or the prices are not available ($0) please send us an email/ call us so we can assist. *Sold out products can be made available upon request.
Cart 0
TrippLite SMX700HG

TrippLite SMX700HG


SmartPro 230V 700VA 450W CE/IEC 60601-1 Medical-Grade Line-Interactive UPS, Tower, Full Isolation, USB, DB9 Serial

  • 700VA line interactive tower UPS
  • Professional features include serial port, USB port, IEC320 plug & outlets, built-in isolation transformer
  • Input: IEC320 C14 (230V 3.6A) / Output: 6 IEC320 C13 (230V)
  • Mutable alarm


  • Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
  • Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
  • Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without using battery power
  • Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
  • Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment
  • Resistant to electrostatic discharge
  • Supports loads up to 700VA/450 watts
  • 36 minutes half load runtime (with 350VA load), 14.5 minutes full load runtime (with 700VA load)
  • 6 protected hospital-grade outlets; IEC C14 inlet on 6-inch dongle
  • RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
  • PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
  • Complete surge protection, line isolation and EMI/RFI noise filtering
  • 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
  • Battery replacement door and back panel equipotential connection (grounding lug)


Output Volt Amp Capacity (VA) 700
Output Watt Capacity (Watts) 450
Nominal Output Voltage(s) Supported 220V; 230V; 240V
Nominal Voltage Details 230v nominal inverter output voltage
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line Mode) -18%, +8%
Output Receptacles (6) C13
Output AC Waveform (Battery Mode) PWM sine wave
Rated input current (Maximum Load) 3.6A
Nominal Input Voltage(s) Supported 230V AC
UPS Input Connection Type C14 inlet
UPS Input Cord Length (ft.) 6 inch dongle., 16 gauge
UPS Input Cord Length (m) 1.83
Recommended Electrical Service 10A 230V
Voltage Compatibility (VAC) 230
Input Phase Single-Phase
Full Load Runtime (min.) 14.5 min. (450w)
Half Load Runtime (min.) 36 min. (225w)
DC System Voltage (VDC) 36
Battery Recharge Rate (Included Batteries) Less than 3.6 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge RBC53
Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off
Typical Battery Lifespan 3-6 years, depending on usage
Expandable Runtime No
Voltage Regulation Description Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC
Overvoltage Correction Input voltages between 206 and 245V AC are reduced by 9%
Undervoltage Correction Input voltages between 183 and 199 are boosted by 10%
Severe Undervoltage Correction Input voltages between 155 and 182 are boosted by 21%
Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
Audible Alarm 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone). Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure, overload conditions and Low Battery events, using our Free PowerAlert UPS management software.
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
UPS AC Suppression Joule Rating 340 joules
EMI / RFI AC Noise Suppression Yes
AC Suppression Response Time Instantaneous
Installation Form Factors Supported with Optional Accessories Wallmount (UPSWM - tower mounting kit)
Primary Form Factor Tower
UPS Power Module Dimensions (hwd, cm) 32.5 x 19 x 22.9
UPS Power Module Weight (kg) 19.1
UPS Shipping Dimensions (hwd / cm) 47 x 31 x 34
Shipping Weight (kg) 20.4
Cooling Method Cooling via rear-exit cooling fan
UPS Housing Material PVC
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 208.6
Battery Mode BTU / Hr. (Full Load) 189.1
Communications Interface USB; DB9 Serial
Transfer Time 5 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 155
High Voltage Transfer to Battery Power (Setpoint) 274
Grounding Lug Equipotential connection (back panel grounding lug)
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
UPS Certifications CE; Tested to UL60601-1 (medical grade)
Product Warranty Period (International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto Rico) 2-year limited warranty


More from this collection